Mechanical Engineer Jobs - Page 84
1,803 open Mechanical Engineer positions in Hardware & Engineering, newest first.
- Open positions
- 1,803
- Category
- Hardware & Engineering
- Apply workflow
- Tailored resume + 1-click autofill
Newest Mechanical Engineer jobs
SpaceX · Starbase, TX (On-site) · 32 days ago
Starship Avionics Mechanical is responsible for producing an avionics system minimizing vehicle cost/mass and providing electrical sensing, actuation, and control for flying the vehicle.
- Full-time
- Lead / Staff
- 5+ years
- mechanical design
- finite element analysis (FEA)
- CAD
Mechanical Engineer (Dragon)
$100k – $140k/yrSpaceX · Hawthorne, CA (On-site) · 32 days ago
A Dragon Mechanical Engineer is responsible for the continued development of critical components and the overall structural design of the most advanced human-rated spacecraft in the world.
- Full-time
- Mid-level
- 1+ years
- CAD
- FEA
- hand calculations
SpaceX · Bastrop, TX (On-site) · 32 days ago
SpaceX is leveraging our experience building rockets and spacecraft to deploy Starlink, the world's largest satellite constellation and most advanced broadband internet system.
- Full-time
- Mid-level
- reliability testing
- failure analysis
- test automation
SpaceX · Starbase, TX (On-site) · 32 days ago
After 50 years, humankind will once again return to the surface of the moon using SpaceX's new vehicle, Crew Starship (also known as HLS or the Human Landing System) - this time for good.
- Full-time
- Mid-level
- 1+ years
- Siemens NX
- Ansys
- Abaqus
SpaceX · Cape Canaveral, FL (On-site) · 32 days ago
As a member of the Starship Launch Engineering team, you will focus on the mechanical design and field support for propellant generation systems that enable rapid, high-volume production…
- Full-time
- Mid-level
- 1+ years
- NX
- CATIA
- Creo
SpaceX · Hawthorne, CA (On-site) · 32 days ago
As a member of the Flight Termination System team, you will have the exciting opportunity to be responsible for the design of the Starship Flight Termination System hardware and explosives!
- Full-time
- Mid-level
- 1+ years
- mechanical design
- hardware integration
- environmental testing
SpaceX · Redmond, WA (On-site) · 32 days ago
Engineers on this team must have a working knowledge of design, manufacturing, testing, and flight.
- Full-time
- Mid-level
- 1+ years
- GD&T
- FEA
- test procedure development
SpaceX · Redmond, WA (On-site) · 32 days ago
SpaceX is looking for a highly motivated engineer to join the Solar Product Team.
- Full-time
- Mid-level
- 1+ years
- 3D CAD
- finite element analysis
- GD&T
Mechanical Engineer, Printer Design & Manufacturing (Raptor)
$100k – $140k/yrSpaceX · Hawthorne, CA (On-site) · 32 days ago
As part of the Raptor 3D printer team, you will play direct role in developing and scaling the printer and its production line.
- Full-time
- Mid-level
- 1+ years
- CAD
- FEA
- GD&T (ASME Y14.5)
SpaceX · Starbase, TX (On-site) · 32 days ago
SpaceX is looking for a Mechanical Engineer who can support power plant development by owning the rotating equipment integration scope from technical specification through equipment…
- Full-time
- Mid-level
- 2+ years
- rotating equipment fundamentals
- API 611/612/616/617
- mechanical specification development
SpaceX · Woodinville, WA (On-site) · 32 days ago
At SpaceX we're leveraging our experience in building rockets and spacecraft to deploy Starlink, the world's most advanced broadband internet system.
- Full-time
- Mid-level
- 3+ years
- CAD
- FEA
- GD&T
SpaceX · Woodinville, WA (On-site) · 32 days ago
At SpaceX we're leveraging our experience in building rockets and spacecraft to deploy Starlink, the world's most advanced broadband internet system.
- Full-time
- Mid-level
- CAD
- finite element analysis
- GD&T
SpaceX · McGregor, TX (On-site) · 32 days ago
SpaceX is looking for engineers to support the development and production testing of Starship/Raptor, Falcon, and Dragon engine and vehicle hardware in McGregor, TX.
- Full-time
- Mid-level
- 1+ years
- fluid systems design
- machining
- welding
SpaceX · Starbase, TX (On-site) · 32 days ago
Starship requires a robust Thermal Protection System (TPS) to withstand the extreme heat generated during atmospheric reentry at hypersonic speeds.
- Full-time
- Mid-level
- 1+ years
- thermal protection systems
- thermal-structural analysis
- Siemens NX
Mechanical Engineer - Battery Pack, Satellites (Starlink)
$100k – $135k/yrSpaceX · Redmond, WA (On-site) · 32 days ago
SpaceX is looking for a Mechanical Engineer to join the Starlink Battery team, focusing on battery pack-level design and development for our next generation of satellites.
- Full-time
- Mid-level
- 1+ years
- CAD
- FEA
- battery pack design
SpaceX · Starbase, TX (On-site) · 32 days ago
The Starship Avionics Mechanical team is responsible for producing an avionics system minimizing vehicle cost/mass and providing electrical sensing, actuation, and control for flying the…
- Full-time
- Lead / Staff
- 3+ years
- GD&T
- finite element analysis
- CAD
Mechanical Engineer
On-siteSpaceX · College Station, TX (On-site) · 32 days ago
As a member of the construction projects team, you will work with engineers across multiple disciplines in the design, procurement, and build of infrastructure at our College Station…
- Full-time
- Mid-level
- 2+ years
- HVAC system design
- piping system design
- fluid dynamics
SpaceX · Starbase, TX (On-site) · 32 days ago
Starship Avionics Mechanical is responsible for producing an avionics system minimizing vehicle cost/mass and providing electrical sensing, actuation, and control for flying the vehicle.
- Full-time
- Lead / Staff
- 3+ years
- GD&T
- finite element analysis
- CAD
SpaceX · Starbase, TX (On-site) · 32 days ago
Our elite Starbase team is working on the toughest and most audacious project on our planet; making humanity multiplanetary.
- Full-time
- Mid-level
- 1+ years
- MEP design
- AutoCAD
- Revit
SpaceX · Bastrop, TX (On-site) · 32 days ago
SpaceX is leveraging its experience deploying and operating the world's largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in…
- Full-time
- Mid-level
- 1+ years
- CAD
- FEA
- GD&T
How Rolev.ai helps with Mechanical Engineer jobs
Rolev.ai is a job search and application tool for US job seekers. It shows which Mechanical Engineer jobs fit your resume, tailors your resume to each posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Common questions
What distinguishes Hardware & Engineering Mechanical Engineer positions?
These roles design physical devices, embedded electronics, robotics automation, and large-scale industrial infrastructure.
What qualifications are required for Mechanical Engineer roles in this sector?
Accredited engineering degree, CAD/CAM tools (SolidWorks, AutoCAD), schematic capture (Altium), embedded programming, and compliance testing.
Where do these positions come from?
From employers' public career sites. Each listing links to the employer's own application page.