Carlisle
Direct SmartRecruiters career site

ERH Utility (3rd Shift)

Pay
$40,063 – $50,079 per year
Location
Carlisle, PA
Listed
Today

Job Summary

The Utility Ex Roller Head position, under direction of a crew leader/operator, performs a range of duties to process rubber sheeting and flashing products through the calendar and/or ERH production equipment.

This position is responsible for material handling with fork trucks, identification of products, interfacing with the barcode system, operating hoists, recording dimensional information, operating windup equipment, and inspecting sheeting.

The incumbent in this position is involved in the setup and changeover of equipment, preparing product for transfers to subsequent steps in the operation, and holds responsibility for the safety, quality, and productivity of the operation.

The hours will be Sunday-Thursday from 11:00pm - 7:30am, with required overtime on the weekends.

Duties & Responsibilities

  • Delivering work in progress and supplies to the work area using fork trucks
  • Moving finished product to the work in progress staging area using fork trucks or tow motors
  • Assist in the operation of the windups
  • Assisting in startups and shutdowns including threading liners, scrapping startup material, feeding the line with mixed stock, and starting fabrics or liners
  • Following processing specifications and grading standards
  • Weighing scrap/rework and identifying it using the bar code system
  • Identifying and tagging defective material
  • Measuring sheeting and flashing using thickness gauges and tape measures
  • Plotting control chart results
  • Executing corrective action when necessary

Will be required to perform other duties as requested, directed, or assigned.

Knowledge, Skills, and Abilities

  • Knowledge:
  • Processing specifications and grading standards for all products produced
  • Operation of various pieces of equipment such as fork trucks, hoists, calendar/ERH windups, tow motors, and strainers
  • Plant safety systems
  • Statistical process control
  • Rubber processing technology
  • Plant 4 conventional and ERH product flow
  • Skills:
  • Reading and comprehension of processing specifications, grading standards, bar code prompts, and product tags
  • Mathematical calculations including keeping counts, tallies, understanding average and standard deviations, percentage defective versus non-defective, and output rate versus standard rate
  • Completing control charts and recording quality assurance information
  • Operating measurement gauges such as digital thickness gauges, tape measures, and scales
  • Driving a fork truck
  • Interfacing with bar code equipment
  • Abilities:
  • Working as a member of a team
  • Communicating effectively with team members, supervisors, management, and other employees in the plant

Competencies

  • Teamwork
  • Builds trust with others by encouraging open dialogue and collaboration
  • Managing Change
  • Able to find common ground solutions despite difficulties or barriers that may be encountered
  • Continuous Improvement
  • Retains a mindset of always striving to make things better to all aspects of the role
  • Customer Focus
  • Listens to understand the needs of customers (internal and external) and keeps the customer's needs in mind
  • Continuous Learning
  • Understands individual strengths, opportunity areas, and seeks development opportunities to leverage strengths and lean into opportunity areas
  • Drive for Results
  • Always has a sense of urgency to solve problems and align goals with attainment of organizational strategy

Education & Experience

  • Education: High School Diploma
  • Equivalent: GED
  • Experience: No previous manufacturing experience required

Equipment & Data Used

  • Equipment run on the job: fork trucks, hoists, bar code terminals, scales, tow motors, and strainers
  • Tools required on the job: tape measures, Stickney gauges, hand tools, scissors, knives, screwdrivers, scrapers, hot knives, and various wrenches
  • Data used on the job: processing specifications, deviations, quality assurance information, productivity information, bar code transactions, and verbal job instructions

Work Environment/Time Worked

  • Work Environment:
  • Work occurs inside a manufacturing plant
  • Plant ambient temperatures in the summer match the outside temperature
  • Potential for temperatures exceeding 100 F
  • Plant is heated in the winter
  • Exposure to airborne mica dust, solvents, steric acid, rubber fumes, fork truck exhaust, and loud noise levels (PPE Provided)
  • Burn hazards on equipment
  • Working on elevated surfaces when on catwalks as catwalks are 15' above the plant floor
  • Cut hazard from knives
  • Pinch hazard on moving mechanical parts including windup chucks, conveyors, and fork truck masts
  • Confined space work while working under conveyors
  • Heavy equipment includes fork trucks, hoists, and tow motors
  • Can be fast paced
  • Time Worked:
  • Monday - Friday with Saturday/Sunday overtime as business dictates
  • Two shift weekly rotation (7:00AM - 3:30PM and 3:00PM - 11:30PM)
  • Or fixed shift (11:00PM - 7:30AM)

Physical Requirements

  • Climbing - while working on catwalks during startup, cleaning, and troubleshooting
  • Balancing - while climbing
  • Stooping, Crouching, and Kneeling - when starting and cleaning the line
  • Reaching - must be able to reach above shoulder level
  • Standing - must be able to stand for the majority of the shift
  • Sitting - while operating fork trucks
  • Pushing & Pulling - while loading liners into windups
  • Lifting - must be able to lift up to 50lbs
  • Dexterity - must be able to use fingers and hands to operate windups, fork truck controls, operate bar code system, to use knives, and while starting sheets into the liner
  • Talking & Hearing - must be able to communicate effectively with team members, supervisors, management, and other employees in the plant
  • Sight - must be able to see and recognize warnings and hazards

Personal Protective Equipment (PPE) Used

  • Hearing Protection
  • Safety Shoes
  • Cut Resistant Gloves
  • Safety Glasses
  • PPE required for use of specific chemicals will be provided when needed

Additional information

Understands and supports the company's Sustainability Management System (SMS) Policy supporting Environmental and Energy management. Follows environmental and energy management system procedures applicable to their role, including those for waste handling, spill prevention, and efficient energy use.

Is aware of the significant environmental aspects and energy uses associated with their work and how their actions affect environmental and energy performance. Promptly reports environmental incidents, energy waste (e.g., air leaks, equipment left running), and improvement opportunities. Completes required environmental and energy training.

Education & Experience

  • Education: High School Diploma
  • Equivalent: GED

Additional Information

All your information will be kept confidential according to EEO guidelines.

We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact.

Information Security Alert

All applicants for careers with Carlisle will be submitted through this site. Carlisle will not extend job offers without prior in-person or visual correspondence and we will not ask you to provide private personal information for a background check prior to extending a job offer. For more information, please review our Privacy policy.

About the Company

Carlisle Companies is a leading manufacturer of building envelope products and solutions that make buildings more energy efficient, durable, and sustainable.

We deliver roofing, insulation, waterproofing, and architectural systems for commercial and residential projects using a focus on innovation and continuous improvement to solve today's challenges.

We're equally committed to our people, prioritizing safety, inclusion, career growth development, tuition assistance, and excellent benefits.

With manufacturing, engineering, R&D, and corporate functions across North America and globally, Carlisle offers stability, agility, and opportunity in a performance-driven culture. Do meaningful work and shape the future of building solutions; apply today and come grow with us.

Read the original posting

From Carlisle's careers page, first listed on Rolev.ai on November 16, 2026. Rolev.ai is not the employer.

How Rolev.ai helps with this application

Rolev.ai is a job search and application tool for US job seekers. For this ERH Utility (3rd Shift) role at Carlisle, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.

  • See how you fit

    Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.

  • Tailor without inventing

    Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.

  • Draft the full kit

    Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.

  • 1-Click Extension Autofill

    The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.

Common questions

What is the salary for the ERH Utility (3rd Shift) role at Carlisle?

The ERH Utility (3rd Shift) posting at Carlisle states compensation of $40,063 – $50,079 per year. Final pay may depend on location, experience, and interview evaluation on Carlisle's official career site.

Where is the ERH Utility (3rd Shift) job at Carlisle located?

This ERH Utility (3rd Shift) position at Carlisle is located in Carlisle, PA. Always check Carlisle's application page for specific state eligibility or relocation policies.

How do I apply for the ERH Utility (3rd Shift) position at Carlisle?

This listing links directly to Carlisle's SmartRecruiters application page. You can apply directly on Carlisle's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the SmartRecruiters application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.