Harness Integration Technician
- Pay
- $30 – $50 per hour
- Location
- San Jose, CA · On-site
- Job type
- Full-time
- Level
- Senior
- Experience
- 2+ years
- Listed
- 17 days ago
Skills & highlights for this role
- Wire harness and cable assembly
- Crimping and soldering
- Reading prints and schematics
- Hands-on tooling (strippers, gauges, pull testers, manual/pneumatic crimpers, soldering stations, heat guns)
- IPC/WHMA-A-620 (Class 2/3) knowledge
- J-STD-001 familiarity
- Custom cable design and build for test and prototype use
Also useful
- IPC/WHMA-A-620 or J-STD-001 certification
- EVT/DVT and test lab support experience
- Cirris cable tester experience
- Fixture integration
- ECO/NPI exposure
- SOP creation and maintenance
- CAD viewer proficiency
- ERP system experience
Responsibilities
- Build build-to-print and custom wire harnesses, including cut, strip, crimp, solder, braid/sleeve, heat-shrink, basic potting, and final terminations.
- Create custom cables and harnesses on demand to support test setups, debugging, EVT/DVT activities, and rapid hardware iteration, often with evolving or incomplete requirements.
- Partner closely with engineering and test teams to quickly translate test needs into practical cable and harness solutions.
- Read and follow drawings, schematics, BOMs, work orders, and ECOs; record traceability in ERP/routers.
- Crimp and verify terminals/contacts (TE/AMP, Molex, JST, Amphenol/LEMO, etc.) with specified tooling; document pull tests when required.
- Print and apply labels and heat-shrink markers per print.
- Perform electrical tests: continuity, insulation/hipot, and basic troubleshooting with DMMs, cable testers, and fixtures.
- Execute rework to spec (e.g., IPC/WHMA-A-620) and support NCMR/MRB containment.
- Maintain 5S/ESD and safety standards; proactively suggest process, tooling, and DFM improvements-especially for testability and iteration speed.
Requirements
- 2-5+ years building wire harnesses and cable assemblies in manufacturing or prototyping environments.
- Strong ability to independently design and execute custom cable builds for test and prototype use.
- Ability to read prints/schematics and follow work instructions with minimal supervision.
- Proficiency in crimping and soldering (selective tinning, shields/drain wires, coax, twisted pair).
- Hands-on experience with tooling: strippers, gauges, pull testers, manual/pneumatic crimpers (Daniels or similar), soldering stations, heat guns.
- Working knowledge of IPC/WHMA-A-620 (Class 2/3) and familiarity with J-STD-001.
- Strong quality and schedule focus, with high first-pass yield and low rework in fast-iteration environments.
Bonus Qualifications
- Current IPC/WHMA-A-620 or J-STD-001 certifications.
- Experience supporting test labs, EVT/DVT builds, and rapid iteration cycles.
- Experience with cable testers (e.g., Cirris) and basic fixture integration.
- Exposure to ECOs/NPI, startup environments, and creating or maintaining SOPs.
- Basic comfort with CAD viewers for drawing review and ERP systems for traceability.
- Bilingual English/Spanish.
The US hourly range for this full-time position is between $30-50 an hour.
- The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience.
- The total compensation package may also include additional components/benefits depending on the specific role.
- This information will be shared if an employment offer is extended.
About Figure
Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.
About Figure
Figure is an AI Robotics company developing a general purpose humanoid. Our humanoid robot is designed for commercial tasks and the home. We are based in San Jose, CA and require 5 days/week in-office collaboration. It's time to build.
We are looking for a Wire Harness Technician. In this role, you will be highly focused on designing and building wire harnesses and custom cables to enable test setups required for rapid iteration across development, validation, and integration efforts. You will operate in a fast-paced prototyping and low-volume environment, building production-quality harnesses as well as on-demand, non-standard cable solutions that directly unblock engineering and testing teams. You will build harnesses from drawings, BOMs, and work orders while meeting IPC/WHMA standards and aggressive delivery timelines.
From Figure's careers page, first listed on Rolev.ai on October 24, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this Harness Integration Technician role at Figure, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Common questions
What is the salary for the Harness Integration Technician role at Figure?
The Harness Integration Technician posting at Figure states compensation of $30 – $50 per hour. It is listed as a full-time position. Final pay may depend on location, experience, and interview evaluation on Figure's official career site.
Where is the Harness Integration Technician job at Figure located?
This Harness Integration Technician position at Figure is located in San Jose, CA (On-site). Always check Figure's application page for specific state eligibility or relocation policies.
What qualifications are required for Harness Integration Technician at Figure?
For the Harness Integration Technician role, Figure highlights 2+ years of relevant experience; experience with Wire harness and cable assembly, Crimping and soldering, Reading prints and schematics, Hands-on tooling (strippers, gauges, pull testers, manual/pneumatic crimpers, soldering stations, heat guns), IPC/WHMA-A-620 (Class 2/3) knowledge, J-STD-001 familiarity. Rolev.ai can score your existing resume against these requirements and show any skill gaps before you apply.
How do I apply for the Harness Integration Technician position at Figure?
This listing links directly to Figure's Greenhouse application page. You can apply directly on Figure's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the Greenhouse application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.