Instrumentation/Automation Service Engineer I
- Pay
- $22 – $45 per hour
- Location
- Marshfield, WI · On-site
- Job type
- Full-time
- Level
- Mid-level
- Education
- Bachelor's degree
- Listed
- Yesterday
Skills & highlights for this role
- diagnose and repair instrumentation and automation failures
- root cause investigation
- preventive maintenance and calibration
- GDP-compliant documentation
- knowledge of OSHA, FDA, ISO, and CLIA regulatory frameworks
Also useful
- laboratory instrumentation experience
- SOP drafting and revision
- vendor collaboration
Position Overview
This role is responsible for diagnosing and resolving failures in enterprise laboratory instruments and automation systems, conducting root cause investigations, and escalating service issues to minimize downtime. It includes performing routine preventive maintenance and calibrations to ensure equipment reliability and compliance with service standards.
The position requires accurate documentation aligned with Good Documentation Practices (GDP) and regulatory requirements such as OSHA, FDA, ISO, and CLIA. Success in this role involves developing technical expertise, training others, and collaborating across teams and vendors to support troubleshooting and project execution.
Flexibility, commitment to quality, and a focus on process improvement-including SOP development and workflow optimization-are essential.
Shift: Monday - Friday 10:00 am - 6:30 pm
First 3 months will be on 1st shift for training before moving to 10am start time. Some training weeks will be hosted in Madison and will require travel.
Key Accountabilities
Include, but are not limited to, the following
- Troubleshooting & Repair: Under general supervision, diagnose, repair, and resolve failures following established procedures on instrumentation and automation systems within the laboratory by applying technical expertise to restore functionality. Escalate unresolved or complex issues to senior staff. Contribute to root cause investigations, assist with implementing corrective actions, and escalating unresolved issues as necessary to minimize operational downtime.
- Preventative Maintenance & Calibration: Conduct regular preventative maintenance and calibration events of laboratory instrumentation and automation systems to ensure consistent performance, reliability, and adherence to established service procedures.
- Documentation & Regulatory Compliance: Accurately document service activities in accordance with GDP, ensuring compliance with safety, quality, and regulatory frameworks such as OSHA, FDA, ISO, and CLIA.
- Technical Expertise & Training: Proactively advance technical expertise/proficiency in servicing laboratory instrumentation and automated systems through continuous learning, hands-on experience, and engagement with more advanced failures/complex repairs.
- Teamwork & Communication: Demonstrate consistently clear written and verbal communication in all interactions with internal and external departments
- Flexibility, Quality & Process Improvement: Demonstrate adaptability in response to shifting priorities and unforeseen challenges, consistently uphold high quality standards in a fast-paced environment, and actively support process enhancements by drafting/revising procedures and identifying opportunities to optimize workflows.
Physical Requirements
- Ability to work on a mobile device, tablet, or in front of a computer screen and/or perform keyboarding/mousing for approximately 80% of a typical working day.
- Ability to work standing for approximately 60% of a typical working day.
- Ability to lift, carry, push or pull up to 40 pounds within the typical working day.
- Ability to comply with any applicable personal protective equipment requirements.
- May be exposed to hazardous materials, tissue specimens, and instruments with moving parts, lasers, heating and freezing elements, and high-speed centrifugation.
- Ability to work weekdays
- Ability to work nights and/or weekends
- Ability to work overtime, as needed.
- Ability to be on-call to support equipment related issues.
Minimum Qualifications
- Bachelor's degree in Engineering, Technology, Electronics or other degree relevant to essential duties; or Associate degree in Engineering, Technology, Electronics and 2 years of relevant experience OR high school diploma/GED and 4 years of relevant experience
- Experience interpreting mechanical parts and assembly drawings.
- Experience with electrical circuits and diagrams, including the use of electrical measurement tools such as multi-meters and analyzers.
- Demonstrated ability to perform the essential duties of the position with or without accommodation.
- Applicants must be currently authorized to work in country where work will be performed on a full or part-time basis. We will not sponsor or take over sponsorship of employment visas.
Pay and benefits
The base pay for this position is $22.45 - $44.85/hour
In specific locations, the pay range may vary from the range posted.
- JOB FAMILY: Engineering
- DIVISION: ONCO Cancer Diagnostics
- LOCATION: United States > Marshfield: Mill Creek Campus
Additional Locations
- WORK SHIFT: Standard
- TRAVEL: Yes, 10 % of the Time
- MEDICAL SURVEILLANCE: No
Significant Work Activities
Continuous walking for prolonged periods (more than 2 hours at a time in an 8 hour day), Lift, carry, push or pull weights of more than 20 pounds/9 kilos on a regular/daily basis
About Abbott
Abbott is a global healthcare leader that helps people live more fully at all stages of life. Our portfolio of life-changing technologies spans the spectrum of healthcare, with leading businesses and products in diagnostics, medical devices, nutritionals and branded generic medicines. Our 122,000 colleagues serve people in more than 160 countries.
Equal opportunity and legal notices
EEO is the Law link - Espanol:
We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to age, color, creed, disability, gender identity, national origin, protected veteran status, race, religion, sex, sexual orientation, and any other status protected by applicable local, state, or federal law. Applicable portions of the Company's affirmative action program are available to any applicant or employee for inspection upon request.
Abbott is an Equal Opportunity Employer of Minorities/Women/Individuals with Disabilities/Protected Veterans.
From Abbott's careers page, first listed on Rolev.ai on November 15, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this Instrumentation/Automation Service Engineer I role at Abbott, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Common questions
What is the salary for the Instrumentation/Automation Service Engineer I role at Abbott?
The Instrumentation/Automation Service Engineer I posting at Abbott states compensation of $22 – $45 per hour. It is listed as a full-time position. Final pay may depend on location, experience, and interview evaluation on Abbott's official career site.
Where is the Instrumentation/Automation Service Engineer I job at Abbott located?
This Instrumentation/Automation Service Engineer I position at Abbott is located in Marshfield, WI (On-site). Always check Abbott's application page for specific state eligibility or relocation policies.
What qualifications are required for Instrumentation/Automation Service Engineer I at Abbott?
For the Instrumentation/Automation Service Engineer I role, Abbott highlights a bachelor's degree; experience with diagnose and repair instrumentation and automation failures, root cause investigation, preventive maintenance and calibration, GDP-compliant documentation, knowledge of OSHA, FDA, ISO, and CLIA regulatory frameworks. Rolev.ai can score your existing resume against these requirements and show any skill gaps before you apply.
How do I apply for the Instrumentation/Automation Service Engineer I position at Abbott?
This listing links directly to Abbott's Workday application page. You can apply directly on Abbott's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the Workday application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.