The PAC Group
Manufacturing & IndustrialDirect Greenhouse career site

Materials Engineer

Pay
$50 – $60 per hour
Location
North Kingstown, RI · On-site
Job type
Contract
Level
Senior
Experience
5+ years
Education
Bachelor's degree
Listed
Today

Skills & highlights for this role

  • composite prepreg layup and cure
  • materials characterization
  • material specification writing
  • test plan and qualification reports

Also useful

  • AFP automation
  • autoclave cure
  • marine corrosion mitigation
  • battery pack potting and thermal interface materials
Free · No account needed

How well does your resume fit this job?

Upload your resume to see your score for this The PAC Group role, what matches, what's missing, and your best other matches.

Scored on our server and not saved there. The file stays in this browser so you don't have to upload it again after you sign up.

About the role

  • Job Title: Materials Engineer
  • Location: North Kingstown, RI
  • Position: Short Term
  • Client Facing: Yes

Role Purpose

This role sits inside Manufacturing and is built to give Design Engineering a strong technical partner on materials - someone who can take on the characterization, benchmarking, and test work needed to bring decision-ready recommendations forward, so Design Engineering's review and sign-off is fast and well-supported. The person in this seat should treat every open material spec as a shared priority and should actively resource the path to closure rather than simply waiting on it.

The material specifications for components like composites, paint, and adhesives should evolve directly alongside equipment procurement and process development. This transparent alignment allows equipment, process, and quality development to move forward smoothly in tandem with material decisions, which eliminates handoff delays between teams and results in clear visibility into open action items and ownership for both Manufacturing Leadership and Design Engineering.

This role focuses on turning engineering requirements into closed, manufacturing-ready specs - it complements Design Engineering's ownership of the vehicle's engineering requirements and trade studies, rather than replacing it. Status tracking is one of the tools this role uses, not the goal in itself; the goal is specs that are closed, correct, and usable on the shop floor.

Reports into Manufacturing leadership. Works in close, ongoing coordination with Design Engineering on open specs, functioning as an embedded materials resource for that partnership. Partners closely with Quality, Manufacturing Engineering, and Supply Chain/Procurement.

Key Responsibilities

Advance specification closure: Maintain a shared tracker of every open material spec (composites, paint, adhesives, corrosives/corrosion-resistant treatments, potting compounds, sealants, etc.) needed for current manufacturing programs, with owner, next step, and target close date.

Bring well-developed, decision-ready technical recommendations to Design Engineering - doing the materials characterization, vendor benchmarking, and test work up front so review and sign-off are as fast and straightforward as possible. Proactively surface and help resolve anything blocking a spec's progress, coordinating with Manufacturing leadership and Design Engineering to line up the right resources and priority.

Materials engineering: Evaluate and qualify material equivalents and substitutes (e.g., domestic/US-availability alternatives for adhesives and composite systems) against program requirements. Own or support material test plans (mechanical, environmental, GED/benchmarking, etc.) in coordination with suppliers and partners (e.g., LGES on battery-related materials work). Translate design intent into manufacturing-usable specs: cure profiles, layup/paint process windows, corrosive material handling and exposure/storage requirements, incoming inspection criteria.

Manufacturing enablement: Partner with Manufacturing Engineering on how material properties and process windows drive equipment selection (AFP, autoclave/oven, paint booths, CNC, etc.) and cell/line design. Define quality acceptance criteria and inspection methods tied to each material spec so Quality can build conformance processes without waiting on Design. Support make/buy and vendor qualification decisions for material suppliers.

Cross-functional partnership: Serve as the dedicated point of contact between Manufacturing and Design Engineering on materials topics, keeping the cadence moving and both sides aligned on priority and status. Build enough technical depth and trust with Design Engineering to take on lower-risk specs directly with their sign-off, so their time is freed up for the highest-value engineering decisions.

Required Qualifications

Education: BS in Materials Science/Engineering, Mechanical Engineering, Chemical Engineering, or related field (or equivalent experience).

Experience: 5+ years of hands-on materials engineering experience with composites (prepreg, layup, cure), and at least one of: paints/coatings, structural adhesives, or elastomers/sealants, in an aerospace, marine, automotive, or similar manufacturing environment.

  • Demonstrated ability to write or close out material specifications, test plans, and qualification reports.
  • Comfortable working directly with manufacturing equipment and process constraints (not just lab/design-side materials work).
  • Track record of building strong working relationships with design/engineering teams and helping cross-functional decisions reach closure in a fast-moving, resource-constrained environment.

Preferred Qualifications

  • Experience with AFP/composite automation processes, autoclave or out-of-autoclave cure systems, or marine/aerospace-grade paint systems.
  • Experience with corrosive and corrosion-resistant materials/treatments in a marine environment (e.g., saltwater exposure, galvanic corrosion mitigation, protective coatings).
  • Familiarity with battery pack materials (potting, thermal interface materials, GED benchmarking) or experience partnering with cell/pack suppliers.
  • Experience in a low-rate/early-production environment (Block 0-type programs) where specs are still maturing alongside hardware.
  • Vendor qualification and supplier management experience for specialty materials.

Pay and benefits

The salary range for this position is dependent upon experience, education, and qualifications.

Pay Range $50 - $60 USD

About PAC Group

At The PAC Group (PAC), we specialize in engineering consulting, program management, and operational excellence-delivering high-impact solutions in more than 20 countries. We're proud to partner with the world's leading companies in automotive, aerospace, industrial, and technology sectors, providing strategic guidance and hands-on execution that drive innovation and efficiency. Whether we're launching advanced manufacturing systems, deploying digital simulation tools, or scaling global operations, PAC thrives at the intersection of technology, engineering, and problem-solving.

Joining PAC means joining a dynamic, fast-paced, and global team that values curiosity, collaboration, and continuous improvement.

Read the original posting

From The PAC Group's careers page, first listed on Rolev.ai on November 18, 2026. Rolev.ai is not the employer.

How Rolev.ai helps with this application

Rolev.ai is a job search and application tool for US job seekers. For this Materials Engineer role at The PAC Group, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.

  • See how you fit

    Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.

  • Tailor without inventing

    Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.

  • Draft the full kit

    Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.

  • 1-Click Extension Autofill

    The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.

Common questions

What is the salary for the Materials Engineer role at The PAC Group?

The Materials Engineer posting at The PAC Group states compensation of $50 – $60 per hour. It is listed as a contract position. Final pay may depend on location, experience, and interview evaluation on The PAC Group's official career site.

Where is the Materials Engineer job at The PAC Group located?

This Materials Engineer position at The PAC Group is located in North Kingstown, RI (On-site). Always check The PAC Group's application page for specific state eligibility or relocation policies.

What qualifications are required for Materials Engineer at The PAC Group?

For the Materials Engineer role, The PAC Group highlights 5+ years of relevant experience; a bachelor's degree; experience with composite prepreg layup and cure, materials characterization, material specification writing, test plan and qualification reports. Rolev.ai can score your existing resume against these requirements and show any skill gaps before you apply.

How do I apply for the Materials Engineer position at The PAC Group?

This listing links directly to The PAC Group's Greenhouse application page. You can apply directly on The PAC Group's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the Greenhouse application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.