Materials Engineer, Metals Joining (Starmind)
- Location
- Bastrop, TX · On-site
- Job type
- Full-time
- Level
- Mid-level
- Education
- Bachelor's degree
- Listed
- Today
Skills & highlights for this role
- welding
- brazing
- diffusion bonding
Also useful
- scanning electron microscopy
- American Welding Society D17.1
- statistical process control
About the role
SpaceX is leveraging its experience deploying and operating the world's largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Realizing this vision demands highly reliable, high performance electrical compute hardware, solar power systems, thermal radiators, and more. These systems must operate in the extreme environment of space while delivering the connectivity, control, power distribution, and processing needed for orbital AI inference.
The Starmind team designs, builds, and operates the orbital compute fabric of the future, developing key in-house technologies from satellites' flight computers and power systems to custom compute electronics, memory, and networking for on-orbit data centers.
As a Materials Engineer you will serve as a technical owner for metal joining across Starmind hardware-developing, qualifying, and sustaining welding, brazing, soldering, and diffusion bonding processes for compute, power, and thermal management assemblies, including liquid-cooled cold plates, heat exchangers, thermal radiators, and hermetic electronics packaging.
You will define joint designs and process specifications, establish the joint properties and acceptance criteria the design community relies on, and scale robust joining processes from prototype to high-rate production.
Responsibilities
- Owned development, qualification, and troubleshooting of metal joining processes for Starmind satellite and ground hardware, including fusion welding (laser, electron beam, and tungsten inert gas), friction stir welding, resistance welding, vacuum and controlled-atmosphere brazing, soldering, and diffusion bonding
- Supported material selection and manufacturing for metallic and joined assemblies such as liquid-cooled cold plates, heat exchangers, thermal radiators, structures, power electronics, and hermetic enclosures
- Defined joint designs, filler metals, braze alloys, interlayers, and process parameters, and wrote the material and process specifications, process control plans, and acceptance criteria
- Developed mechanical and physical properties of base metals and joints, including strength, fatigue, fracture toughness, and thermal and electrical conductivity, through thermal cycling and on-orbit environments
- Set inspection and nondestructive evaluation methods, including computed tomography, radiography, ultrasonic C-scan, helium leak testing, and proof and burst testing, to verify joint integrity and leak-tightness
- Investigated joint and material failures with fractography, metallography, and characterization testing, and drove corrective actions into design and production
- Partnered with design, manufacturing, quality, and suppliers to design for joinability, qualify outsourced welded, brazed, forged, and cast hardware, and move processes from prototype to high-rate production
Basic Qualifications
- Bachelor's degree in materials science, materials engineering, welding engineering, metallurgical engineering, or another science, technology, engineering, or mathematics field
- Experience with metal-joining processes, including welding, brazing, soldering, and diffusion bonding, and with alloys commonly joined in aerospace and electronics hardware, such as aluminum, copper, stainless steel, nickel, and titanium
Preferred Skills and Experience
- Master's degree or PhD in materials science, materials engineering, welding engineering, metallurgical engineering, or another science, technology, engineering, or mathematics field
- First-principles understanding of joining metallurgy, including solidification, wetting and capillary flow, interdiffusion and intermetallic formation, heat-affected-zone behavior, and residual stress, and of how process variables drive joint performance
- Experience with characterization techniques and equipment, including scanning electron microscopy and energy-dispersive spectroscopy, optical microscopy, hardness testing, mechanical property testing, and spectroscopy for composition or phase
- Hands-on experience developing and qualifying welding, brazing (vacuum, furnace, or induction), and/or diffusion bonding processes, including joint design, fixturing, and parameter development
- Experience joining aluminum, copper, and dissimilar metals for thermal-management hardware, such as cold plates and microchannel heat exchangers, or for electronics packaging
- Familiarity with joining standards and specifications, such as American Welding Society D17.1 and C3.7, Aerospace Material Specification 2675, and American Society of Mechanical Engineers Section IX, and with their use in process qualification and procedure development
- Experience applying design of experiments, statistical process control, and process capability analysis to joining processes in production
- Demonstrated success in a rapidly growing, fast-paced, and highly competitive environment
- Drive to execute in a scrappy, entrepreneurial environment with tight timelines and aggressive schedules
- Hands-on experience in a high-volume manufacturing environment
Itar Requirements
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
About SpaceX
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
Equal opportunity and legal notices
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to.
From SpaceX's careers page, first listed on Rolev.ai on November 18, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this Materials Engineer, Metals Joining (Starmind) role at SpaceX, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Similar roles
- Silicon Photonics Thin Film Development EngineerIntel · Albuquerque, NM
- Materials & Processes Test Engineer (Associate or Experienced)Boeing · Huntsville, AL
- Test Wafer and Qual Automation Engineering (Summer 2027)GlobalFoundries · Essex Junction, VT
- Senior Casting Simulation EngineerBeehive Industries, LLC · Loveland, OH
- Product EngineerFoundation Alloy · Cambridge, MA
- Product Development EngineerKLA · Totowa, NJ
More at SpaceX
All SpaceX jobsCommon questions
Where is the Materials Engineer, Metals Joining (Starmind) job at SpaceX located?
This Materials Engineer, Metals Joining (Starmind) position at SpaceX is located in Bastrop, TX (On-site). Always check SpaceX's application page for specific state eligibility or relocation policies.
What qualifications are required for Materials Engineer, Metals Joining (Starmind) at SpaceX?
For the Materials Engineer, Metals Joining (Starmind) role, SpaceX highlights a bachelor's degree; experience with welding, brazing, diffusion bonding. Rolev.ai can score your existing resume against these requirements and show any skill gaps before you apply.
How do I apply for the Materials Engineer, Metals Joining (Starmind) position at SpaceX?
This listing links directly to SpaceX's Greenhouse application page. You can apply directly on SpaceX's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the Greenhouse application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.