McWane, Inc.
Manufacturing & IndustrialDirect SmartRecruiters career site

McWane Ductile Ohio - Poles PLC Technician

Location
Coshocton, OH · On-site
Job type
Full-time
Level
Mid-level
Experience
2+ years
Education
Associate degree
Listed
Today

Skills & highlights for this role

  • Allen-Bradley PLC programming
  • ladder logic
  • Studio 5000
  • NFPA 70E

Also useful

  • Siemens PLC
  • FactoryTalk View

Essential Duties and Responsibilities

include those listed below, other duties may be assigned. This position is a full time (minimum 40 hours per week) on-site position.

  • Ability to troubleshoot equipment using PLC programs to support plant Electricians.
  • Install Programmable Logic Controllers on new and existing equipment
  • Good understanding of NFPA 70E and basic wiring techniques
  • Experience with drives, motors, and motor controls
  • Possess a good understanding of sensors
  • Possess a basic understanding of pneumatics - cylinders, valves, solenoids, etc.
  • Have a good understanding ladder logic program
  • Ability to read and understand electrical schematics
  • Documenting work and maintaining records. Back-up copies of programs and parameter sets for the plant.
  • Assisting in the training of staff
  • Monitoring work and systems to ensure compliance with Federal, State, and County codes, regulations, standards, and mandates
  • Create and read logic and flow diagrams for program design, programming, simulation and testing, and start-up
  • Program and Troubleshoot Allen Bradley control systems hardware and software (Studio 5000, RS Logix 500/5000, Factory talk View ME/SE).
  • Interpreting project documentation to develop an understanding of the process control requirement.
  • Coordinate with engineering and maintenance on existing machine control modifications to robotic, electrical, electronic, hydraulic, and pneumatic and vision systems. Retrofits to upgrade from SLC-era control systems for risk reduction are a possibility.
  • Increase uptime, throughput, efficiency, and quality, through the process of maintaining, designing, developing and continuously improving our equipment and the utilization of technology to ensure the best quality products are produced.
  • Perform continuous improvement activities to improve safety, to increase productivity and to reduce production cost, by development and improvement of electrical control systems, PLC, HMI & robotics programming, including design, implementation, and troubleshooting.
  • Assisting in developing of PM strategies and identify areas of improvement within the control system infrastructure.
  • Participation in design reviews for new machinery to provide input into control system capabilities which affect machine function. Must be able to work closely with CAD designer/engineering to integrate/package/select appropriate electromechanical presses and servo motors to meet design requirements.
  • Provide training and guidance to maintenance personnel related to controls systems.
  • Train employees on electrical and mechanical troubleshooting of existing equipment.
  • Scheduled plant coverage rotation required to remotely log in and troubleshoot machine issues, or, if required, be on site to assist with troubleshooting.
  • Resolve customer questions and/or concerns without seeking assistance from leadership.
  • Assist in identifying and procuring equipment and parts necessary for daily maintenance requirements.
  • Proficient troubleshooting, including electrical/electronic systems (+/- 10V, 24V, 120V)
  • Proactive individual that takes responsibility for their equipment.
  • Work in a team environment where honest communication, a positive attitude, engagement, and personal accountability are expected.
  • Work off-shifts, weekends, and extended shifts (i.e., 12 hrs.). This position may require off-shift support for production or start up.

Supervisory Responsibilities: None.

Qualifications

Education and/or Experience: Must be experienced in PLC logic and programming with any of the following PLC's: Allen Bradly, Siemens. AA in Electrical Engineering Technology or Mechatronics Technology preferred plus 2 years' related experience in an industrial manufacturing setting; OR an equivalent combination of related education and/or experience. Certification of AB training courses a plus

Computer Skills: Computer literate; proficient with Microsoft Windows, MS Office programs and applications for word processing, email, database management and spreadsheets.

  • Reasoning Ability: Ability to look at electrical blueprints, review them to identify issues and ensure they will work before being installed.
  • Must apply common sense and solve practical problems.
  • Ability to look at electrical grids and evaluate them for any problems, isolate the issue, and solve the issue to make sure they are being installed correctly.
  • Ability to identify issues and make corrective measures to fix problems with electrical components.
  • Electrical technicians need to be able to look for problems in complicated electrical grids, isolate the issue and solve it.

Physical Demands

  • The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job.
  • While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
  • The employee is usually required to sit.
  • The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, crouch.
  • The employee must frequently lift and/or move up to 10 pounds.
  • Specific vision abilities required by this job include close vision, color vision and peripheral vision.
  • The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job.
  • While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles and outside weather conditions.
  • The noise level in the work environment is usually moderate.,

Additional Information

All your information will be kept confidential according to EEO guidelines.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Read the original posting

From McWane, Inc.'s careers page, first listed on Rolev.ai on November 17, 2026. Rolev.ai is not the employer.

How Rolev.ai helps with this application

Rolev.ai is a job search and application tool for US job seekers. For this McWane Ductile Ohio - Poles PLC Technician role at McWane, Inc., it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.

  • See how you fit

    Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.

  • Tailor without inventing

    Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.

  • Draft the full kit

    Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.

  • 1-Click Extension Autofill

    The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.

Common questions

Where is the McWane Ductile Ohio - Poles PLC Technician job at McWane, Inc. located?

This McWane Ductile Ohio - Poles PLC Technician position at McWane, Inc. is located in Coshocton, OH (On-site). Always check McWane, Inc.'s application page for specific state eligibility or relocation policies.

What qualifications are required for McWane Ductile Ohio - Poles PLC Technician at McWane, Inc.?

For the McWane Ductile Ohio - Poles PLC Technician role, McWane, Inc. highlights 2+ years of relevant experience; a associate degree; experience with Allen-Bradley PLC programming, ladder logic, Studio 5000, NFPA 70E. Rolev.ai can score your existing resume against these requirements and show any skill gaps before you apply.

How do I apply for the McWane Ductile Ohio - Poles PLC Technician position at McWane, Inc.?

This listing links directly to McWane, Inc.'s SmartRecruiters application page. You can apply directly on McWane, Inc.'s site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the SmartRecruiters application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.