Mechanical Sub-Systems Engineer, Entry Level
- Pay
- $85,770 – $137,600 per year
- Location
- Mojave, CA
- Listed
- 4 days ago
What you’ll do
Depending on size and complexity, a Subsystems Engineer may own one or more vehicle systems (Propulsion, Fuel / Energy Storage, Electrical, Avionics, Landing Gear, Flight Controls, Hydraulics, Environmental Controls / Pressurization, etc.), or they may work on a team helping to develop a single system to maturity.
Regardless, these engineers are responsible for fleshing out an initial requirement and translating that into a design that meshes with the overall aircraft goals.
This means conceptualizing a solution, negotiating detailed requirements, performing detailed design and analysis, developing definition (models, drawings, schematics, work instructions), supervising fabrication and installation, defining and performing operational tests, and ultimately, acting as a system subject matter expert as the vehicle moves into integrated tests and flight.
The Subsystems Engineer will get to explore the nooks and crannies (i.e. bowels and hell-holes) of our airplanes all while smelling like jet fuel, contorting under cabin floors, climbing into engine nacelles, squinting at multi-meters, and trying to figure out why the thing isn’t doing the thing it’s supposed to. If this is your idea of a good time, we’d love to learn more about you!
- Category: Engineering
- Location: Mojave, CA
- Citizenship Required: United States Citizenship
- Clearance Type: None
- Schedule: 9/80 Work Schedule
- Relocation Assistance: Relocation assistance may be available
Duties and Responsibilities may include, but are not limited to
- Developing end-to-end mechanical sub-system concepts
- Selecting and / or designing system components
- Determining loads and system demands based on vehicle requirements
- Analyzing system performance with installation details, documenting the work, and presenting results for review
- Designing for fault-tolerant behavior of all critical subsystems
- Developing build documentation (drawings, work instructions) and supervising part and system fabrication and integration
- Developing functional, acceptance-level, and “qualification” level test procedures and conducting tests
- Providing system knowledge and expertise to, or potentially as part of, the flight test team for informed conduct of initial and ongoing vehicle flight testing
Required Qualifications
- Understanding of and ability to analyze system behavior
- Knowledge of related system components and their functions
- Ability to operate test and vehicle instrumentation to verify system performance
- Strong problem solving, organizational, and communication skills
- Experience in 3D Computer Aided Design (CAD)
- Ability and interest to work across multiple engineering disciplines on an aggressive schedule
- Bachelor of Science in a relevant engineering discipline or substantial equivalent experience
- Ability to obtain and maintain a Department of Defense (DoD) secret clearance
Preferred Qualifications
- Experience in NX, Catia V5, or Solidworks
- Rapid prototyping experience
- Hands-on design and build experience
- Aerospace experience (work history, pilot’s license, experimental aircraft building, etc.)
- DOD Secret Clearance
- Additional degrees or additional relevant work experience
Essential Job Functions
- Requires mobility and the ability to bend and reach
- May infrequently require lifting, carrying, pushing, and/or pulling materials (Ground Power Units, fuel bowsers, small aircraft) with a force up to 30 pounds
- Manual dexterity and coordination are required; repetitive hand motion (e.g., to operate computer keyboard, test equipment, aircraft avionics)
- Vision at close distances and the ability to adjust focus for prolonged periods (i.e., computer screen, flight displays)
- Ability to remain sedentary or stationary for prolonged periods of time
- Ability to write for extended periods of time
- Ability to work in an office setting for prolonged periods of time
- May be asked to carry up to 20 lbs. up and down a flight of stairs on a regular basis such as files, books, office equipment, test hardware, etc.
- Occasional reaching overhead and lifting up to 15 pounds
- Ability to converse and communicate information with others
- Occasional exposure to chemical vapors and/or fumes in low non-hazardous concentration
- Potential to climb up and down steps on a daily basis
- Must be able to read and understand Safety Data Sheets (SDS)
About Scaled
Founded by visionary aircraft designer Burt Rutan, Scaled Composites has been in the business of Designing, Building, and Flying unique airplanes and spacecraft for over 40 years. We are a modestly sized company, constantly building small teams of empowered and capable employees to achieve extraordinary accomplishments in aerospace. From the farthest (Global Flyer), to the largest (Stratolaunch), to the highest (SpaceShipOne, Proteus), and many in between, Scaled’s track record of innovation has pushed against and expanded some of the most stubborn corners of the flight envelope.
We honor that legacy today by doing what we’ve always done - seeking out the hardest problems in aerospace and having fun while solving them. With an average of a new design first flight for every year of our existence, there is no better place to practice the arts and science of new aircraft development than here at Scaled.
From Scaled Composites, LLC's careers page, first listed on Rolev.ai on November 13, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this Mechanical Sub-Systems Engineer, Entry Level role at Scaled Composites, LLC, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Similar roles
All Systems Engineer jobsMore at Scaled Composites, LLC
All Scaled Composites, Llc jobsCommon questions
What is the salary for the Mechanical Sub-Systems Engineer, Entry Level role at Scaled Composites, LLC?
The Mechanical Sub-Systems Engineer, Entry Level posting at Scaled Composites, LLC states compensation of $85,770 – $137,600 per year. Final pay may depend on location, experience, and interview evaluation on Scaled Composites, LLC's official career site.
Where is the Mechanical Sub-Systems Engineer, Entry Level job at Scaled Composites, LLC located?
This Mechanical Sub-Systems Engineer, Entry Level position at Scaled Composites, LLC is located in Mojave, CA. Always check Scaled Composites, LLC's application page for specific state eligibility or relocation policies.
How do I apply for the Mechanical Sub-Systems Engineer, Entry Level position at Scaled Composites, LLC?
This listing links directly to Scaled Composites, LLC's application page. You can apply directly on Scaled Composites, LLC's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.