Production Associate I - Assembly/Harness
- Location
- Westfield, PA
- Listed
- 4 days ago
Overall Responsibilities
Production Associates (PA) follow work instructions to prepare material for further use in the production process or produce material which is sent directly to the customer.
Production Associates are encouraged to learn all aspects of the manufacturing process which may involve computer use, manipulating or cutting wire, operating equipment, using hand tools, soldering, testing product, reading and using work instructions or prints, inspecting product, assembling, building, labeling or packing product.
Production Associates at all levels give constant attention to the quality of work and material, while also attending to safety, housekeeping, and time efficiency.
Key Areas of Responsibilities and Essential Position Functions
Giving attention to safety, housekeeping, time efficiency and materials applies to all processes:
- Ensure the workplace is consistently clean and orderly and is free of hazards.
- Check for quality defects and inform Supervision / management for corrective action.
- Report time, production, materials used, and other data relative to the job accurately and in the manner prescribed. Work Instructions, Job Travelers and SOPs:
- Read and use complex work instructions, Job Travelers and SOPs.
- Read and use customer or ECM prints.
- Read and use wire diagrams. Strip, Twist, and Tin Process
- Set-up and operate rotary stripping equipment for stripping, twisting and tinning. Soldering
- Set up and operate resistance soldering equipment.
- Solders to IPC 620 Class 2 standard. Wire Preparation: Paper Cutting / Filler Removal Process
- Using the Job Traveler, verify that the cords at the work center are the correct ones.
- Using hand-operated cutting tools, remove all paper and other types of filler material from around the conductors in the area where the jacket has been removed, leaving the conductors free from controllable trimming defects. Giving attention to safety, housekeeping, time efficiency and materials applies to all processes:
- Report time, production, materials used, and other data relative to the job accurately and in the manner prescribed. Work Instructions, Job Travelers and SOPs: • Read and use complex work instructions, Job Travelers and SOPs.
- Staggers cuts according to work instructions.
- Inspect each conductor for scrapes or damages resulting from the filler removal or previous operations. Wire Preparation: Cut Tubing • Reads and measures in the English and metric measurement systems.
- Uses work instructions to initiate and complete work.
- Manages raw material.
- Operates various pieces of cutting equipment.
- Completes necessary record keeping (Forms).
- Accurately and safely sets up all tubing and flat ribbon cutting equipment. Wire Preparation: Apply wire terminations
- Using automated equipment, attach wire terminations using proper techniques according to instructions on the Job Traveler.
- Set up all automated terming equipment (change applicators, etc.).
- Read print and thread tubing on fine strands of drain wire.
- Use hand tools to crimp (bond / fasten) terminal to wires.
- Conduct “pull” quality testing. Marking / Labeling Process
- Apply properly to product using work instructions.
- Produce labels on the labeling equipment. Tools:
- Stripping/Crimping
- Torque Wrenches and calibration
- Hand Tools (i.e. pliers, drivers, sockets, manual and electric screwdrivers etc.) Assemble, Build Harnesses | Powercord:
- Understand wire routing.
- Using a product model, a kit, work instructions, and / or a simple diagram:
- Prepare wires and all other materials.
- Set up the project on a board or bench, as necessary.
- Insert terms into housings. Test Product
- Maintain records of all tests.
- Ensure that defective product is dispositioned properly. Packing:
- Pack according to work instructions.
- Move packages to Shipping.
- Place Job Traveler in designated area.
- Conduct product inspections, pack product according to work instructions. Perform other duties as assigned.
Required Education, Skills, Experience and Certifications
- Education: High School Diploma / GED / or equivalent
- Experience: non required.
- Knowledge and Technical Skills:
- Basic reading and writing and comprehension skills
- Arithmetic skills for measurement: (addition, subtraction, multiplication, division, fractions)
- Tools able to use: Measuring Tools; basic computer use, hand crimping tools
- Software:
- Language: English
- Certifications: IPC
From Ecm - Electri-Cord Mfg's careers page, first listed on Rolev.ai on November 13, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this Production Associate I - Assembly/Harness role at Ecm - Electri-Cord Mfg, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Similar roles
- Production AssociateCarrier · CAI23: Carrier-Indianapolis, 7310 West Morris…
- Production AssociateBatesville · Vicksburg, MS
- Production Associate I / Stuff / 2nd Shift / Mon - Sat 3pm - 3amSmithfield Foods · Junction City, KS
- Production AssociateSilgan Containers · New Castle, PA
- Production Associate - 1st Shift (Cortland, NY)Danaher · Cortland, NY
- Production AssociateConagra Brands · Troy, OH
Common questions
Where is the Production Associate I - Assembly/Harness job at Ecm - Electri-Cord Mfg located?
This Production Associate I - Assembly/Harness position at Ecm - Electri-Cord Mfg is located in Westfield, PA. Always check Ecm - Electri-Cord Mfg's application page for specific state eligibility or relocation policies.
How do I apply for the Production Associate I - Assembly/Harness position at Ecm - Electri-Cord Mfg?
This listing links directly to Ecm - Electri-Cord Mfg's application page. You can apply directly on Ecm - Electri-Cord Mfg's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.