RF Design Engineer
- Location
- San Francisco, CA · On-site
- Job type
- Full-time
- Level
- Mid-level
- Experience
- 3+ years
- Listed
- 30 days ago
Skills & highlights for this role
- HFSS
- CST
- S-parameter measurement
- RF matching networks
- controlled impedance PCB design
Also useful
- 802.11ah / Wi-Fi HaLow
- Altium
- anechoic chamber measurement
- FCC Part 15
The Role
Specter is hiring an Antenna and RF Hardware Design Engineer to own the antenna and RF hardware design that sets the ceiling on our deployment range, capacity, and sectorization geometry. This role takes antenna designs from EM simulation through fabrication, measurement, and production qualification, and supports the broader RF team on PCB-level matching, isolation, and layout decisions.
Responsibilities
- Antenna design: Model patch, array, and air-gap antennas in HFSS or CST. Take designs from simulation through fabrication, measurement, and qualification.
- RF front-end design: Design matching networks, harmonic filtering, and PA/LNA chains for sub-GHz and Wi-Fi radios.
- Multi-radio integration:Integrate Wi-Fi, HaLow, and other radios on shared platforms. Own coexistence and isolation across co-located standards.
- PCB-level RF design: Own RF schematic and layout decisions: stack-up, controlled impedance, RF routing, and isolation. Review PCB layouts with the EE team.
- Measurement and bring-up: Characterize designs on VNA, run S-parameter and radiation pattern measurements, and drive bring-up of new RF hardware.
- Production qualification: Define acceptance criteria for RF designs and partner with the test team on qualification methodology.
- Design and IP documentation: Maintain design files, measurement reports, and qualification artifacts.
Qualifications
- 3-5 years of RF hardware design experience on production wireless hardware.
- Strong RF fundamentals: transmission lines, impedance matching, S-parameters, signal integrity.
- EM simulation: HFSS, CST, or equivalent.
- Hands-on RF measurement: VNA, S-parameter, and pattern or gain measurement.
- PCB-level RF design experience: stack-up, controlled impedance, RF routing, isolation.
- Sub-GHz or ISM band experience (902-928 MHz preferred).
- Project ownership and timeline discipline, you flag risks early and deliver without being chased.
Nice to Have
- Antenna design experience: patch, array, air-gap, or other constrained-form-factor antennas.
- Multi-radio platform integration and coexistence (Wi-Fi + sub-GHz, Wi-Fi + cellular, or similar).
- 802.11 standards knowledge, ideally including 802.11ah / Wi-Fi HaLow.
- Anechoic chamber operations or near-field scanning.
- FCC Part 15 awareness as it relates to intentional radiators.
- Altium or comparable PCB layout tool familiarity.
Company Background
Specter's mission is to help automate the physical world.
Today, we build video sensors with state-of-the-art AI agents that answer any question, anywhere in their environments. Our systems can automatically detect and reason about any physical activity captured on camera, from security incidents (e.g. perimeter intrusion, theft, LPR), to safety monitoring (e.g. PPE detection, injured people), to operational efficiency (e.g. material tracking, congestion monitoring). We offer both long range wireless (1km range) and wired sensor variants to suit any deployment.
Our co-founders Xerxes and Philip are passionate about empowering our partners in the fast approaching world of physical AI and robotics. We are a small, fast growing team who hail from Anduril, Tesla, Uber, and the U.S. Special Forces.
From Specter's careers page, first listed on Rolev.ai on October 10, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this RF Design Engineer role at Specter, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Similar roles
- RF Hardware EngineerAnySignal · Los Angeles, CA
- RF Desense & Multi Radio Coexistence EngineerTesla · Palo Alto, CA · $120k – $288k/yr
- 4G/5G/RF EngineerTamus · Bryan, TX
- RF Antenna EngineerHark · San Jose, CA
- Senior RF EngineerSamara Aerospace · San Francisco, CA
- Pre-Award: MXM- Radio Frequency Engineer IIIBarbaricum · Crane, IN
Common questions
Where is the RF Design Engineer job at Specter located?
This RF Design Engineer position at Specter is located in San Francisco, CA (On-site). Always check Specter's application page for specific state eligibility or relocation policies.
What qualifications are required for RF Design Engineer at Specter?
For the RF Design Engineer role, Specter highlights 3+ years of relevant experience; experience with HFSS, CST, S-parameter measurement, RF matching networks, controlled impedance PCB design. Rolev.ai can score your existing resume against these requirements and show any skill gaps before you apply.
How do I apply for the RF Design Engineer position at Specter?
This listing links directly to Specter's Ashby application page. You can apply directly on Specter's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the Ashby application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.