Wafer Fab Equipment Engineer
- Location
- Goleta, CA
- Listed
- 10 days ago
About the role
Be visionary
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins.
Job Summary
As part of the Uncooled Detector (Focal Plane Array) Low-Rate Production team, the Wafer Fab Equipment Engineer will be responsible for the ownership, reliability, and continuous improvement of wafer fabrication equipment supporting low-rate manufacturing of infrared detector devices.
The role focuses on improving OEE (Overall Equipment Effectiveness) for equipment used in plasma etch, thin film deposition, lithography, and wet processing, while ensuring tools are safe, available, capable, and production-ready.
The Equipment Engineer will be a liaison between process and maintenance providing hands-on technical support for low-rate production activity; troubleshoot complex equipment issues; optimize preventive maintenance strategies; support the qualification, sustainment, and recovery of critical tools and modules; and own data analysis and trends for optimum equipment health.
This role works closely with Process Engineering, Maintenance, and Quality teams to ensure stable execution of production commitments.
This is an ideal position for a self-directed, technically strong, and collaborative engineer who enjoys hands-on equipment work, root-cause problem solving, and operating in a structured cleanroom production environment. The work environment is a mix of office and cleanroom settings, within a collaborative, supportive, and engaging team culture.
Primary Duties & Responsibilities
- Own and support assigned wafer fabrication tools and associated subsystems used in low-rate production
- Troubleshoot, diagnose, and resolve equipment issues impacting safety, yield, schedule, or throughput
- Drive equipment reliability improvements through root cause analysis and corrective/preventive actions
- Partner with Process Engineers to ensure tools meet process capability and control requirements
- Support hands -on wafer processing and recovery activities for production lots as needed
- Collect, analyze, and trend equipment performance metrics (OEE, Uptime, MTBF, MTTR, repeat failures)
- Improve equipment diagnostics, automation, and recovery procedures to reduce unplanned downtime
- Document equipment procedures, configurations, and workflows in MES -ready formats
- Ensure compliance with safety, cleanroom, and EHS requirements
- Collaborate with Process, Maintenance, Quality, and R&D teams to support stable low-rate production execution
Job Qualifications
- Minimum Bachelor's degree in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, or a related technical discipline
- 1-5 years of relevant experience supporting semiconductor, MEMS, or microfabrication equipment
- Familiarity with equipment metrics (MTBF, MTTR, OEE), SPC concepts, or structured escalation workflows
- Strong written and verbal communication skills in English
- Proficient computer skills, including JMP, Microsoft Word, Excel
- Strong troubleshooting, root -cause analysis, and problem -solving skills
- Ability to work hands -on with semiconductor fabrication equipment, including vacuum systems, RF plasma systems, motion control, and wet processing tools
- Experience with one or more key wafer fabrication processes
- Experience using basic inspection and diagnostic tools (e.g., microscopes, electrical test equipment; SEM/FIB exposure a plus)
- Familiarity with cleanroom operations, safety practices, and controlled manufacturing environments
- Must be a U.S. Citizen or Permanent Resident
Desired Background
- Exposure to infrared detectors, focal plane array, or imaging device fabrication
- Experience developing and executing preventive maintenance strategies
Lean Six Sigma or other problem solving/decision making methods (8D, Kepner-Tregoe, or equivalent)
Salary Range
$113,600.00-$151,400.000
The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position.
Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions.
Equal opportunity and legal notices
Teledyne is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.
From Flir's careers page, first listed on Rolev.ai on November 6, 2026. Rolev.ai is not the employer.
How Rolev.ai helps with this application
Rolev.ai is a job search and application tool for US job seekers. For this Wafer Fab Equipment Engineer role at Flir, it shows how your resume fits, tailors your resume to the posting, and prepares the application for you to review.
See how you fit
Openings from employer career sites are ranked against your whole resume—and searchable inside Claude, ChatGPT, and Cursor via Rolev.ai MCP.
Tailor without inventing
Every change to your resume is checked against your original. New experience goes in only with your yes—zero fabricated claims.
Draft the full kit
Tailored and Full Match resumes, role-specific cover letters, and answers to employer screening questions are prepared in seconds.
1-Click Extension Autofill
The Chrome extension fills the employer's Greenhouse, Workday, Lever, or Ashby form in 1 click. You review it and press Submit.
Similar roles
- Wafer Fab Material HandlerBroadcom · Pennsylvania-Breinigsville-9999 Hamilton Blvd
- Wafer Fab Yield Process EngineerRenesas Electronics · Palm Bay, FL
- Wafer Fab Technician - Metallization, Dry Etch & Wet EtchSemtech · City of Industry, CA
- Wafer Fab Technician - PECVD, Dry Etch & Wet EtchSemtech · City of Industry, CA
- Wafer Fab Technician - Photolithography & Wet EtchSemtech · City of Industry, CA
- Wafer Fab SupervisorSemtech · City of Industry, CA
Common questions
Where is the Wafer Fab Equipment Engineer job at Flir located?
This Wafer Fab Equipment Engineer position at Flir is located in Goleta, CA. Always check Flir's application page for specific state eligibility or relocation policies.
How do I apply for the Wafer Fab Equipment Engineer position at Flir?
This listing links directly to Flir's Workday application page. You can apply directly on Flir's site, or use Rolev.ai to check your resume fit, generate a zero-hallucination tailored resume and cover letter for this posting, and autofill the Workday application form in 1 click with the Rolev.ai Chrome extension. You always review the form and press Submit yourself.